BEND-TECH PRO!!!!

[MR.ROCKAPE]

AS MANY OF YOU KNOW THE LAST THREE BUILD-UPS OF MINE HAVE BEEN DONE WITH THE USE OF BEND-TECH PRO...

http://www.2020softwaresolutions.com/bt_pro.htm

SO I THOUGHT I WOULD GIVE A BRIEF WRITE UP ON IT FOR ANYONE INTERESTED IN GETTING A TUBE BENDER,AND SOFTWARE THEN MAYBE THIS WILL HELP YOU OUT!!!!

I ACTUALLY TESTED THE BETA VERSION OF THIS PROGRAM THREE MONTHS BEFORE IT WAS RELEASED TO THE PUBLIC.SO I HAVE BEEN USING IT FOR LONGER THAN MOST.

WITH PRO YOU CAN BUILD SINGLE PARTS FROM EITHER A PREDETERMINED TEMPLATES OR JUST DESIGN IT CUSTOM!!!

HERE IS A FENDER I WAS PLAYING WITH...

http://i28.photobucket.com/albums/c233/rockape81/tubefender.gif

THIS PROGRAM TELLS YOU HOW MUCH TO CUT OFF,WHERE TO BEND IT AND HOW MANY DEGREES TO BEND IT TO.

THE DODGE TRUGGY STARTED ON MY PC LIKE THIS....
http://i28.photobucket.com/albums/c233/rockape81/1TRUGGY-1.gif

AND ENDED UP LIKE THIS...
http://i28.photobucket.com/albums/c233/rockape81/A1.jpg

THE GREEN YJ STARTED ON MY PC LIKE THIS!!!!
http://i28.photobucket.com/albums/c233/rockape81/WRANGLER2.gif
AND ENDED UP LIKE THIS...
http://i28.photobucket.com/albums/c233/rockape81/100_0770.jpg
(DIS-REGUARD GAY RIG STACKING PIC...)

[MR.ROCKAPE]

THEN THE LO-BUDGET PIMPIN...
STARTED LIFE LIKE THIS....(ONLY 36 INCHES WIDE)
http://i28.photobucket.com/albums/c233/rockape81/NEWBUGGY.gif
EVOLVED TO THIS...(39 INCHES WIDE AND ONLY 20 MINUTES TO MODIFY FROM THE ORIGINAL)
http://i28.photobucket.com/albums/c233/rockape81/WIDEBUGGY.gif

AND EVENTUALLY THIS...
http://i28.photobucket.com/albums/c233/rockape81/100_0752.jpg

AND THE BEST PART OF USING ANY OF THE SOFTWARE FROM 2020SOLUTIONS IS THAT WHEN YOU CALL TECH SUPPORT YOU GET THE GUY THAT DESIGNED THE PROGRAM.....NOT HABEEB!!!!

I STARTED WITH THE CHEAPEST VERSION COST $59 AND BUILT MY FIRST BUGGY WITH IT!!!!
http://i28.photobucket.com/albums/c233/rockape81/WALLOFDEATH.jpg

ONE LAST THING IF YOU CANT COME UP WITH THE $275 TO BUY PRO...GO AHEAD AND BUY THE ONE YOU CAN AFFORD BECAUSE CHRIS AT 2020 WILL LET YOU UPGRADE TO PRO AND TAKE WHAT YOU ALREADY PAID OFF OF THE $275....FOR EXAMPLE....IF YOU BUY EZ AT $59 USE IT AND UPGRADE IT ONLY COSTS YA $216 TO UPGRADE!!!!!

JUST LOOK WHAT BEND TECH 3D,AND 10 MINUTES OF EXPLAINING IT TO WIXJP DID FOR HIS FIRST CAGE!!!!
http://www.therockgods.com/forum/showthread.php?t=5080

[Air Sierra]

very nice looks like im buying some more goodies

[wix]

I dont understand how you can use a bender without bendtech. It makes life so much easier. This peice has 4 bends in it (as many as some ghetto backhalf :mullet: ) I wanted to put as close to the tub as possible to protect it from getting mashed in. But because of the lip on the tub I couldnt get to close (i wouldnt be able to pop the peice in). I figured I had about 1/8" tolerance on both sides plus it had to be 49 inches OD to line up with rest of the cage. With bend tech this peice came out dead nuts. :Big Grin:
http://i81.photobucket.com/albums/j224/wixjp_photos/bak.jpg
Its well worth the money.