Hillbilly Delux

[L.D.]

i'm new here, not sure if anyone knows who i am, but i've been working on a stationwagon for the trails. it's a bit redneck, so don't laff. some pictures are to fallow shortly. it used to be a '79 toyota stepside p/u, with a ford v8,till i went to the hammers for THANKSGIVING. and some how got a bit ABUSIVE. so now it looks like this jungle gym short bus. ( i'm further along in shorter time than "LUMPY" ) :eek:

[BIG BLUE]

i'm new here, not sure if anyone knows who i am, but i've been working on a stationwagon for the trails. it's a bit redneck, so don't laff. some pictures are to fallow shortly. it used to be a '79 toyota stepside p/u, with a ford v8,till i went to the hammers for THANKSGIVING. and some how got a bit ABUSIVE. so now it looks like this jungle gym short bus. ( i'm further along in shorter time than "LUMPY" ) :eek:

uhhhhh everyone knows you L.D. your the king of sun valley and I have heard hey is that the guy with all the toyotas on the hill more than once.....:tongue: now get on with the photos of the jungle gym and those super fly shifters of yours...and your blinging rims....i hate threads that are spreads all over.....:wink: And good call on getting someone who knows how to use a camera and computer both to post pics for you

[L.D.]

ya, i'm still fumbling with the photo bucket, but i'm sure help is on the way.

[jeeper89]

a teaser:
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4456.jpg

[jeeper89]

3 link rear
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4421.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4422.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4431.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4423.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4432.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4448.jpg

[jeeper89]

views of the chassis
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4438.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4425.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4424.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4442.jpg

[jeeper89]

bling grille
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4436.jpg

[jeeper89]

views of the interior
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4445.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4443.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4433.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4423.jpg

[jeeper89]

front view of suspension
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4447.jpg

[MR.ROCKAPE]

bling grille
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4436.jpg

IS THAT A KING BLING GRILL???:eek:

[jeeper89]

shifters:Big Grin:
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4435.jpg


then view of the top
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4444.jpg

[jeeper89]

rims:
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4420.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4440.jpg
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4441.jpg

[L.D.]

IS THAT A KING BLING GRILL???:eek:

NO, thats the KING OF SUN VALLEY grill (from a ford f150 doncha know):::mullet:

[L.D.]

if you don't behave, i'll lock you in my basement

[MR.ROCKAPE]

if you don't behave, i'll lock you in my basement

WHEN YOU WORK ON THAT..... DO YOU HUM THAT TUNE ABOUT THE WHEELS ON THE BUS GO ROUND AN ROUND????

[MR.ROCKAPE]

views of the chassis
http://i42.photobucket.com/albums/e305/jeeper89/CIMG4442.jpg

HEY LD....ARE YOU ADDING A DOOR THERE???A SCREEN DOOR???:eek:

[L.D.]

naw, figgerd id just tie a rope across it
actually, i'm too fat an old man to clime over the bar all the time, so i cut it out and will be adding in a new piece dropping down to make a doorway for my fat ass to fall out of.

[MR.ROCKAPE]

WELL EITHER WAY I LIKE THE WAY THE WHEEL RINGS TURNED OUT!!!!THERE WILL BE NO QUESTION WHOs THOSE ARE ONCE THEY REACH THE SUN VALLEY CHOP SHOP!!!!

[Sierra Valley]

Damn take that down to the local elementry school and let the kids have a new toy:Big Grin:

LD when are we doing a bronco canyon run?

[L.D.]

LD when are we doing a bronco canyon run?[/QUOTE]

why, did you want to ride bitch in my rig too? :kackepieksen:

[MR.ROCKAPE]

why, did you want to ride bitch in my rig too? :kackepieksen:

ARENT WE ALL GOING IN YOUR RIG THERE LD???84 PASSENGER CRAWLER!!!:eek:

[BIG BLUE]

and you say my shit is booty fab???? HUH???? The cage looks taller than I remember. You need to paint it yellow and get one of those flashing stop signs for the back so when on a trail no one will pass you....whats going in the back? Maybe a hot tub???? That would be sweet. Looking pretty good!

[Lumpy]

i'm new here, not sure if anyone knows who i am, but i've been working on a stationwagon for the trails. it's a bit redneck, so don't laff. some pictures are to fallow shortly. it used to be a '79 toyota stepside p/u, with a ford v8,till i went to the hammers for THANKSGIVING. and some how got a bit ABUSIVE. so now it looks like this jungle gym short bus. ( i'm further along in shorter time than "LUMPY" ) :eek:

HEY YOU CANT JUST COME OUT TALKING SHIT ABOUT ME IN YOUR OPENING STATEMENT MAN THATS FUCKED UP. UNLESS THATS HOW "LD" ROLES:14:

[BIG BLUE]

I think his attitude is clearly stated on the rear axle of his mobile jungle gym.....dont be hurt though lumpy I think yours will be worth the wait....but as slow as your going just make sure you have room for my oxygen bottle and walker okay!:eek::cool::rolleyes:

[Lumpy]

I think his attitude is clearly stated on the rear axle of his mobile jungle gym.....dont be hurt though lumpy I think yours will be worth the wait....but as slow as your going just make sure you have room for my oxygen bottle and walker okay!:eek::cool::rolleyes:

I PATTENTED THE MIDDLE FINGER 7 YEARS AGO LOOK AT MY HOODS AND WHEELS "OXYGEN WALKER SHIT YOU WILL NEED THAT BEFORE ME GRANDPA:eek:

[BIG BLUE]

I PATTENTED THE MIDDLE FINGER 7 YEARS AGO LOOK AT MY HOODS AND WHEELS "OXYGEN WALKER SHIT YOU WILL NEED THAT BEFORE ME GRANDPA:eek:

uh yeah thats what I said make sure you have room for my oxygen bottle and walker cause god knows I wont have a rig left by then...my booty fab rig will have completly dissolved into dust and returned to the earth...and I forgot about your rims....see how long its been?????

[L.D.]

ARENT WE ALL GOING IN YOUR RIG THERE LD???84 PASSENGER CRAWLER!!!:eek:

NOT ONLY ARE WE ALL GOING IN MINE, BUT THE RIDE ATENDANT WILL BE SERVING COMPLIMENTERY BARLY SODAS, AND PEANUTS DURING THE RIDE :Big Grin: AND PLEASE REMEMBER TO KEEP YOUR HANDS AND FEET IN THE RIDE AT ALL TIMES :gapteeth:

[L.D.]

:HEY YOU CANT JUST COME OUT TALKING SHIT ABOUT ME IN YOUR OPENING STATEMENT MAN THATS FUCKED UP. UNLESS THATS HOW "LD" ROLES:14:

:gapteeth::kackepieksen::kackepieksen::thBEER:

[L.D.]

WELL LETS SEE, I'M SURE SOME OF YOU REMEMBER MY '79 OD GREEN TOYODA WITH THE V8 IN IT. '89 302, MP435, AND DUEL TOY T-CASES. BEEN LIKE THAT FOR 5 YEARS OR BETTER. WELL I WENT TO THE HAMMERS FOR THANKGIVING, AND IT SEEMS I GOT A BIT ABUSIVE, BROKE SOME SHIT, BENT SOME SHIT, AS A MATTER OF FACT I BROKE MY SHORT SIDE AXLE, A 30 SPLINE CHROME MOLLY LONGFIELD. BENT THE FRONT AXLE :eek: SO AFTER I GOT HOME I TOOK OFF THE TIN AND STARTED ON THE BUS. USING THE HENDRIX F-TOY AS AN INSPERATION, MY BUDDY STEVE (purple sammy) AND I BENT THIS UP. WE STRETCHED IT 10", ADDED THE ANGRY EYEBROW, AND SINCE I WANTED A FOUR SEETER (for the grandkids) WE CHANGED THE BACK TO THE STATION WAGON LOOK. NOT QUITE UP TO ROCK APE'S STANDERDS, BUT BESA ME CHEECHO OAKE KULO :mullet: (thats for all you redneck haters) FIRST THING I DID WAS BUY A SET OF 42" TIRES FROM JOE THE TOE thank you. BLOKED UP THE FRAME AT THE RIDE HIGHTH OF MY P/U, AND RAISED THE AXLES TO ACOMADATE THE NEW TIRES. ON THE FRONT I TOOK OFF THE 44044s, AND INST. A SET OF STOCK '78 CHEROKEE FRONT SPRINGS. ON THE REAR IS NOW A THREE LINK WISHBONE ON GRAND CHEROKEE V8 COILS. REAR AXLE TRUSSED UP, AND RUBICON EXPRESS JOINTS. THE UPPER LINK USES A PAIR OF MID 80s CHEVY SPRING BUSHINGS IN THE FORWARD MOUNTS. SO WHEN I WAS DONE WITH THE 42s ON, THE FRAME IS AT THE SAME HIGHTH AS THE P/U WITH 35s ON IT.

[BIG BLUE]

WOW I am proud of you....thats alot of typing.....now just learn to post pics and your a bonified computer expert!!!! So what kinda seat you putting in the back??? I was thinking a nice futon would be good...:Big Grin: and I think you need to trim your steering rod or is this gonna be a rat pack style wheeler????

[L.D.]

DO I HAVE TO PAY THE $20 BEFORE I CAN POST PICS ? I WILL CUT THE STEARING SHAFT AFTER THE SEATS ARE MOUNTED. AS FAR AS THE BACK SEAT , I HAVE A JEEP REAR SEAT NOW, BUT MY WIFE REALY LIKES THE SAND BUGY REAR SEATS.

[jeeper89]

DO I HAVE TO PAY THE $20 BEFORE I CAN POST PICS ? I WILL CUT THE STEARING SHAFT AFTER THE SEATS ARE MOUNTED. AS FAR AS THE BACK SEAT , I HAVE A JEEP REAR SEAT NOW, BUT MY WIFE REALY LIKES THE SAND BUGY REAR SEATS.

did you try photobucket???

[Sierra Valley]

why, did you want to ride bitch in my rig too? :kackepieksen:[/QUOTE]

Naw figure I'd show ya how its done again:Big Grin:

[1SAWB]

NICE STICKER ON THE DIFF L.D. :Big Grin:

[L.D.]

YA, SOME DAMND OL SILLY REDNECK GIMMY THAT :Big Grin:

[L.D.]

GOT STARTED ON THE STINGER TODAY. STILL HAVE TO GET THE BRACES PUT IN.

[MR.ROCKAPE]

GOT STARTED ON THE STINGER TODAY. STILL HAVE TO GET THE BRACES PUT IN.

NICE!!!!YOU JUST NEED ONE OF THOSE RECIEVER PLUGS FOR THE FRONT THAT SAYS "REMOVE TO TOW "THIS" TOYOTA.:Big Grin:

LOOKS LIKE YOU EVEN FIGGER'D OUT HOW TO POST YOUR OWN PICS???

[L.D.]

i'm thinkin bout a push bar for th booty fab heeps. maybe a cattle catcher like an old train. wait till you see wat i'm gona do in th rear reciever. OH HELL YA, POSTIN MY OWN PICS. LOOK OUT NOW

[jeeper89]

NICE!!!!YOU JUST NEED ONE OF THOSE RECIEVER PLUGS FOR THE FRONT THAT SAYS "REMOVE TO TOW "THIS" TOYOTA.:Big Grin:

LOOKS LIKE YOU EVEN FIGGER'D OUT HOW TO POST YOUR OWN PICS???

:eek: thats a toyota.. i thought it was a surburban on toy axles

[L.D.]

DUDE, WHERE HAVE YOU BEEN :28: THATS TH SHORT BUS:eek:

[Sierra Valley]

Hey LD rig is looking good. Are you going to tie that front stinger into the front part of your cage? Glad you can now post pics.

[L.D.]

did it yesterday, no pictures yet. my wife took the batteries out of the camara to use in her video game. god i love redneck wimmin

[MR.ROCKAPE]

did it yesterday, no pictures yet. my wife took the batteries out of the camara to use in her video game. god i love redneck wimmin

I THOUGHT YOU WERE USING THE BLING CLEAR HOOD??

[L.D.]

I THOUGHT YOU WERE USING THE BLING CLEAR HOOD??

I WILL BE, BUT THIS HOOD WILL SIT OVER THE ENGINE TILL I GET THE BARS BENT UP FOR THE COULING, AND WILL SUPPORT THE PLASTIC SAGGY. THEN I CAN TRIM THE PLASTIC SAGGY DOWN TO MAKE IT FIT PROPERLY.

[L.D.]

WELDED IN THE UPPER SUPPORT TUBES, AND GOT STARTED ON MOUNTING THE RADIATOR AND STEARING COOLER. WILL WORK ON GETTING THE GRILL HARD MOUNTED. THE ELECTRIC FAN I'M GOIN TO USE WILL PULL AIR THREW THE STEARING COOLER AS WELL AS THE RADIATOR. I'VE DONE SOME WORK ON THE JEEP EXTRACTION TOOL, BUT GOT IT JAMMED WITH A CHERICAR HANGING FROM IT. MORE WORK ON THIS LATER:76:

[L.D.]

the old truck. LOOK DOC HARDCORE POINTS FOR TRASHING AT THE HAMMERS? hell, this was in 2wd going to a trail.

[L.D.]

SORRY, just figured out how to resise, maybe a little smaller eh ? SO, i moved the engine back in the frame 8", and made new motor mounts. added on a RANGER TOURQUE SPLITTER that bolted to the bellhousing,(27% overdrive-HA 5th GEAR) the MP435 bolted to it, and of course the two toy t-cases (i mean dayam, it is still a toyota, right ?) the BUDBUILT crossmember was trimed to fit flush with the bottom of the frame, and some new shifters were made to fit. (more dang bling) i used the same single exhost syst. that was on it before. but i traded the FLOWMASTER 2 chamber for a 3 chamber. everyone else liked the way it sounded, but they wern't in the cab with me. i had a new rear driveshaft made for it from DRIVELINE TECH in washington. 2000 taco yokes, and front CVjoint, with the quarter inch wall tubing. ITS PURDY. the front driveline is using the old front, long splined with quarter inch tube. but i needed to add into it a cut down toyota rear shaft with a larger carrier bearing to make up the differance from the t-case to the front driveline flange. i will need to build onto the crossmember to hold the carrier bearing.

[MR.ROCKAPE]

SORRY, just figured out how to resise, maybe a little smaller eh ? SO, i moved the engine back in the frame 8", and made new motor mounts. added on a RANGER TOURQUE SPLITTER that bolted to the bellhousing,(27% overdrive-HA 5th GEAR) the MP435 bolted to it, and of course the two toy t-cases (i mean dayam, it is still a toyota, right ?) the BUDBUILT crossmember was trimed to fit flush with the bottom of the frame, and some new shifters were made to fit. (more dang bling) i used the same single exhost syst. that was on it before. but i traded the FLOWMASTER 2 chamber for a 3 chamber. everyone else liked the way it sounded, but they wern't in the cab with me. i had a new rear driveshaft made for it from DRIVELINE TECH in washington. 2000 taco yokes, and front CVjoint, with the quarter inch wall tubing. ITS PURDY. the front driveline is using the old front, long splined with quarter inch tube. but i needed to add into it a cut down toyota rear shaft with a larger carrier bearing to make up the differance from the t-case to the front driveline flange. i will need to build onto the crossmember to hold the carrier bearing.

COOL...NOW PULL IT ALL TOGETHER AND GET IT OUT ON THE TRAIL!!!!ANY NEW PICS OF THE MODS YOU MADE TO THE SIDE BARS???

[L.D.]

no new pictures as yet. i'm going to try and bring the story up to date with pictures as i go.

[jeeper89]

no new pictures as yet. i'm going to try and bring the story up to date with pictures as i go.

pics yet???

[L.D.]

pics yet???

NO, MY PHOTOGRAPHER HAS ABANDON ME
work has been done, just no pictures have been taken to show it. hell, it even has a plastic hood on it now. :eek:

[Connect]

Hey I forgot to ask, but you were looking to get another set of rock rings right?

[L.D.]

Hey I forgot to ask, but you were looking to get another set of rock rings right?

WHY YES I AM. ARE THEY DONE ? CAN I HAVE THEM, AND FEEL THEM, AN CARESS THEM WITH LOVING AFFECTION. CAN I ROLL THEM AROUND IN MY DRIVEWAY, AN WATCH THEM GLISTEN IN THE SUN ? OH YES, I AM STILL WAITING FOR MY OTHER SET OF RINGS. OHHH, WAITINNNGGG

[Connect]

WHY YES I AM. ARE THEY DONE ? CAN I HAVE THEM, AND FEEL THEM, AN CARESS THEM WITH LOVING AFFECTION. CAN I ROLL THEM AROUND IN MY DRIVEWAY, AN WATCH THEM GLISTEN IN THE SUN ? OH YES, I AM STILL WAITING FOR MY OTHER SET OF RINGS. OHHH, WAITINNNGGG

Yea I pretty much forgot ;)

I'll see what I got laying around on monday but this week is probably gonna be pretty busy.

[jeeper89]

http://www.youtube.com/watch?v=h9diBfrWS_o&feature=related

[MR.ROCKAPE]

I THINK LD IS JUST A HILL"BILLERIE" NOT EVEN DELUXE AS THAT THING......

[Robicon]

http://www.youtube.com/watch?v=h9diBfrWS_o&feature=related

3' lift blocks, nice :eek:

[L.D.]

a couple pics, not the latest thow

[L.D.]

few more home made pully on alt

[wix]

Looks good. Whats left to get it done?

[L.D.]

gettin the seats mounted up, made the driver seat on sliders (a request from the wife) so the wife can drive it too. just picked-up the rear seat today. now i will have to get it mounted. then its back to the dash & firewall.

[L.D.]

did a quick test, or just fuckin off, not sure which

[BIG BLUE]

did it yesterday, no pictures yet. my wife took the batteries out of the camara to use in her video game. god i love redneck wimmin
A video game....
Is that what you call it???:04:
looking good L.D.

[Sierra Valley]

Hey LD are you at home most the day during work? Been wanting to get over your way and see your rig. Also, did you get those seats redone?

[jeeper89]

come on LD.. where are some updated pics.. when are you going to finish this thing up????(you know so you dont have to keep asking your wife to borrow her truck)

[L.D.]

yes i did get the seats redone, orange and black sun shade. the same material used for boats and awnings. i am home most of the time, its best to give me a call to make sure, and i'm always home after 3/3:30
but i like using my wifes truck. its a capable rig, just has small tires on it so i don't have far to fall out. this last summer she drove up thompson hill (ducy trail ) with a paper back book in one hand and the other arm hanging out the window. (funny shit to watch):Big Grin: now that it's startin to warmup a bit, i'm back out there again. it's hard to get motivated when you can't feel your fingers anymore.

[xjmoser]

Where is the progress? Fathers day is gonna be here before you know it.

[L.D.]

Where is the progress? Fathers day is gonna be here before you know it.

OH I KNOW IT, AND THATS OUR ANNUAL RUBICON RUN WKND. we like to get in there before the rock stackers start paving there way threw.

[Connect]

Get to skinning and it would be ready to wheel!

[NoBrainR]

L.D., how'd your front drive line turn out with that pillow block, and where did you get it ? I'm thinking I'm going to do the same in mine.

[L.D.]

L.D., how'd your front drive line turn out with that pillow block, and where did you get it ? I'm thinking I'm going to do the same in mine.

it turned out better than expected. i'll get some pictures up tomorrow. i bought the pillow blocks (bought two) on e-bay. been doin lots of the little things to button-up shit i've already started. you know, the stuff that doesn't ever show progress.

[L.D.]

here are some pics

[L.D.]

some other shots

[Sierra Valley]

Looks good LD. You gonna be around this week? I want to come over and check it out in person.

[NoBrainR]

Looks good. Definately going to use that idea on mine. Will make my (or at least my buggies :Big Grin: ) flat belly much easier. I may stop by this week too to check it out.

[L.D.]

cool, i'm normally here. especialy after 3

[DrSmash]

I want to build that shotgun shifter you want. I can use tubing and flat plate to make a simulated double barrel shotgun reciever and barrel. I am thinking about the stock coming out of a shiftboot and the barrels bent to a comfortable feel. wouldn't be real but will fool most gawkerS!!!

[MR.ROCKAPE]

I THINK THAT WOULD BE THE PERFECT ACCESORY TO LDs RIG...



HEY LD...IS THIS THING DONE YET????:rolleyes:

[yotapower]

selling it already?
http://reno.craigslist.org/car/752321390.html

[L.D.]

thats not my rig, it's too good lookin

[RARECJ8]

yeah, but will it ever see dirt beyond ur driveway?

hehehe


mb

[Connect]

I haven't driven by your place lately, what's goin on with the school bus?

[1SAWB]

selling it already?
http://reno.craigslist.org/car/752321390.html



LOL THIS IS DREW'S JUNK HE GOT IT IN A TRADE I THINK

[L.D.]

A look at my junk today

[MR.ROCKAPE]

HOLY CRAP....DID YOU ROB JOHN FORCE...OR JUST THE SUMMIT DEMO SHELF???I ALWAYS LIKED THOSE BUG CATCHERS.....THIS IS THE ONE I GOT FOR MY NASH....

http://www.speedwaymotors.com/p/3792,449_Shotgun-Bill-Scoop.html

YOU KNOW YOU BETTER NOT TAKE THAT ON THE STREET.....SUN V PD WILL GIVE YA A TICKET FOR LOOKING LIKE IT MIGHT GO FAST!!!!!

[L.D.]

had a guy stop-in and give it to me. he said he thought it would look cool on my rig. had to make an adapter plate for it to set on my 2brl, even got the linkage to work.

[MR.ROCKAPE]

had a guy stop-in and give it to me. he said he thought it would look cool on my rig. had to make an adapter plate for it to set on my 2brl, even got the linkage to work.

SHOULD ADD 25 EXTRA H.P........WHEN DROPPED OUT OF A PLANE!!!!

[L.D.]

i think i need a TIGGER. i need someone to weld my new shifter together (so i don't melt it down)

[stv]

i think i need a TIGGER. i need someone to weld my new shifter together (so i don't melt it down)

bring it by my shop (hood machine) on a saturday and i'll get it welded up for ya

[L.D.]

bring it by my shop (hood machine) on a saturday and i'll get it welded up for ya

HOODS ON GREG ISN'T IT ?

[Sierra Valley]

Looks good LD. How long before you get her out on the trail?

[stv]

HOODS ON GREG ISN'T IT ?

yeah, the weldshop is on the corner of greg and marrietta

[L.D.]

Looks good LD. How long before you get her out on the trail?

fired it up today and set the timeing, the GOD DAMND P/S PUMP WILL NOT PUMP. it's a new pump too. i'll get it replaced tomorow. have to do some moification to the hydrolic clutch shit. the wireing is almost done, whew. started the axle builds, 60&70. 5.13s, detroit front, and welded rear. then get them mounted in the frame. I want to take it into the con for the Marlin run.

[L.D.]

OUT WITH THE OLD, IN WITH THE NEW
BELIEVE IT OR NOT, THATS 44" UNDER THAT TIRE :Big Grin:

[ikrawl]

that rig is lookin good:Big Grin: would like to get a run in with ya sometime!

[trupster415]

looks good ld.. is the builder ball moving enough?

[L.D.]

ya, it's not hittin on the top at all, it just doesn't have enough throw to it.

[MR.ROCKAPE]

IS THIS THING GONNA MAKE THE MARLIN RUN???:cool:

[L.D.]

YES, no skins,no back seat, BUT I'M DRIVIN THE FUCKER IN!!! Phill may be towin me out, but I'M DRIVIN THE FUCKER IN :gapteeth::gapteeth:

[1SAWB]

LOOKIN GOOD L.D.

[wix]

Looks good.
What joint did you use on the rear upper (on the axle)?
I think I saw you the other day at hose & fittings. Was gonna introduce myself but didnt want to interupt.

[L.D.]

i used a Rubicon Express builder ball. it's bigger than the link joints.
You should have introduced yourself, we're campin together in a couple a weaks anyway right?

[wix]

i used a Rubicon Express builder ball. it's bigger than the link joints.
You should have introduced yourself, we're campin together in a couple a weaks anyway right?

Where abouts? Was gonna try and make it up to fordyce if my jeep is done and I find a babysitter. Im also using the RE builders ball on the rear.

[L.D.]

oh, i'll be in the con at the springs on the wknd of the 13th. test drivin ya know :gapteeth:
hey, in hose an fittings was i pickin up a couple brass fittings?

[wix]

oh, i'll be in the con at the springs on the wknd of the 13th. test drivin ya know :gapteeth:
hey, in hose an fittings was i pickin up a couple brass fittings?

Not sure what you were getting. But I dont think they had exactly what you wanted. I was on my phone and checking out my new brake lines they made me.

[L.D.]

Not sure what you were getting. But I dont think they had exactly what you wanted. I was on my phone and checking out my new brake lines they made me.

I've got the vary first one they made there, it's on my slave cyl. for the clutch. I must have been looking for the adapters to use my toyota brake lines in my chevy master cyl. If there was another guy with me, that was Steve Dunkan (YOTA POWER)

[wix]

I've got the vary first one they made there, it's on my slave cyl. for the clutch. I must have been looking for the adapters to use my toyota brake lines in my chevy master cyl. If there was another guy with me, that was Steve Dunkan (YOTA POWER)

Yup it was then.

[MR.ROCKAPE]

WELL HOW DID IT DO???:gapteeth:

[Connect]

WELL HOW DID IT DO???:gapteeth:

Wonder if he is still up there? :tongue:

[85runner]

I do know he made it out under his own power! Not sure if he found any bugs or not. There was a 4 hour wait to get up Cadillac. and all I could hear was his air horn the whole time!!!:gapteeth:

[L.D.]

THE RIG DID VARY WELL, A FEW MINER ISSUES. (NOT THE HORN) :gapteeth:
actually got it laid up on the right side once, but not bad. i will post-up better pictures as i get them, but here's a couple.

[L.D.]

ONE MORE

[Connect]

Oh dear god it's alive!!! Congrats LD, it looks good!

[BIG BLUE]

So is that a new L.D. special design floating spring setup? Rig looks good...and who would have thought that L.D. would be sporting a rebel flag :eek:

[MR.ROCKAPE]

NICE SPRING........ISNT THAT AN XJ PART???:gapteeth:

DID YA FIND PHIL-DO OF THE RABBIT RATTLER DIESEL???

[L.D.]

YES, IT IS AN XJ PART (you see how long it lasted)
PHILL AND DOC SMASH BOTH CAMPED WITH US IN "CAMP NEVADA"
remember, "what happens in camp nevada, stays in camp nevada" :mullet:

[wheeler4x4samota]

nice

cowboy shaggin waggin

[L.D.]

nice

cowboy shaggin waggin

ahhh, more like a redneck short bus :gapteeth: