1 1/4 hiems

[POOR BOY]

i was wondering were the best place to buy the chromo 1 1/4 hiems i need 4 of them for my four link, thanks guys

[MIGHTYRAM97]

i was wondering were the best place to buy the chromo 1 1/4 hiems i need 4 of them for my four link, thanks guys

NOT ON THE INTERNET !!!! THATS FOR SURE....[/COLOR]
I am going to buy mine (AGAIN) from SAMCO...and this time I'll get them.. unlike the fuckstick in Fl.:rolleyes:

[POOR BOY]

how much does samco charge?

[MR.ROCKAPE]

how much does samco charge?

I THINK THE HEIM,BUNG AND MISALIGNMENT SPACERS AS WELL AS THE JAMB NUT ARE CLOSE TO $100 EACH!!!!AND DONT FORGET THE 2 INCH .250 WALL TUBE AT CLOSE TO $11 A FOOT!!!CALL ME FOR THE TUBE SINCE ROK-JEEP HAD ME CUT 12 FEET OUT OF A 22 FOOT STICK AND LEFT ME WITH MY DICK IN MY HAND!!!!:mad:

[POOR BOY]

I THINK THE HEIM,BUNG AND MISALIGNMENT SPACERS AS WELL AS THE JAMB NUT ARE CLOSE TO $100 EACH!!!!AND DONT FORGET THE 2 INCH .250 WALL TUBE AT CLOSE TO $11 A FOOT!!!CALL ME FOR THE TUBE SINCE ROK-JEEP HAD ME CUT 12 FEET OUT OF A 22 FOOT STICK AND LEFT ME WITH MY DICK IN MY HAND!!!!:mad:

ill see how much i need and ill let you know, BTF has them for 60 bucks

[Connect]

Those are some massive fawking heims for a four link no??? I plan on using the HM-16-1 1.0" CrMo rod end w/ stainless steel liner ($65 ballistic) on my upper triangulated 3 link, with poly bushings frame side. Then I'm using 909 XM-12 3/4" w/ 5/8" ball CrMo rod end w/ kevlar liner ($25 ballistic fab) for the lower links.

[MR.ROCKAPE]

ill see how much i need and ill let you know, BTF has them for 60 bucks

ACTUALLY BTFs ARE SAME PRICE WHEN YOU ADD $20 FOR THE BUNG $20 FOR THE SPCERS AND 2.99 FOR THE JAMB NUT!!!+SHIPPING!!!!

[POOR BOY]

ya its kinda over kill but i know it will be strong wer building with 4 1 1/4 hiems for the lower links and 4 3/4 hiems for the torque bars and the track bar

[POOR BOY]

ACTUALLY BTFs ARE SAME PRICE WHEN YOU ADD $20 FOR THE BUNG $20 FOR THE SPCERS AND 2.99 FOR THE JAMB NUT!!!+SHIPPING!!!!

i was thinking instead of using the bungs is to tap the inside of the arm

[Connect]

i was thinking instead of using the bungs is to tap the inside of the arm

That's a big fawking tap yo~!

[POOR BOY]

That's a big fawking tap yo~!

ya i have a customer that has a machine shop at his house and he did all the tapping on my steering for like 10bucks a hole i have to call him and see if he can tap them though he has some huge taps and stuff

[Connect]

ya i have a customer that has a machine shop at his house and he did all the tapping on my steering for like 10bucks a hole i have to call him and see if he can tap them though he has some huge taps and stuff

lol, well if I had only known that someone knew someone with a decent machine shop I wouldn't have bought all those weld in bungs :wink:

Speaking of Tube how much 1.5" .25 wall DOM you got left rockape? Any 2" .25 wall?

[POOR BOY]

the hiems a 1 1/4 20 pitch on the thread right?

[MR.ROCKAPE]

lol, well if I had only known that someone knew someone with a decent machine shop I wouldn't have bought all those weld in bungs :wink:

Speaking of Tube how much 1.5" .25 wall DOM you got left rockape? Any 2" .25 wall?

I GOT LIKE 16-18 FEET OF 1.5 .250 AND I HAVE THE 22 FEET OF 2 .250 BUT ITS IN STICKS OF 12 AND 10 FEET!!!!BOTH DOM!!!

[POOR BOY]

well nevermind unless i get like .500 wall tubing from what i understand you can tap the .250 wall because theres not enough there so im probly going to have to buy thebungs anyway

[wix]

I was gonna run the new evo joints but after adding up the cost I decided to try somthing else. Check this link out (if you havent already)
http://www.pirate4x4.com/tech/billavista/PR-Joints/index.html
Now ive decided to run the Re super flex joints and two RE builder ball joints. Got them pretty cheap like $30 for the 2 1/2" joints and $40 for the larger 3' joints.

[POOR BOY]

ya from what i can find it is the cheapest though blue torch, so im probly going to order through them

[MR.ROCKAPE]

ya from what i can find it is the cheapest though blue torch, so im probly going to order through them

Did ya try calling Sambo at Samco???856-4100.....He is a good guy and local,usually really close on prices too.Not talking down BTF Im sure they have the good stuff too!!!!

If ya do call him tell him you want the MR.ROCKAPE discount.....(maybe not....if will probably be cheaper if you claim you dont know me!!!!:cool:)

[POOR BOY]

no i didnt ill call him up now:Big Grin: i dont know what is better saying i do or dont know you:cool:

[jeeper89]

ive heard alot about people having to wait a long time to get things from BTF. local might be the better way to go, even if it is a few dollars more here.

[POOR BOY]

ya my buddy gets his from fibercraft up in reno but there 80 bucks with out bungs and jamnuts

[jeeper89]

have you called samco yet?

[POOR BOY]

have you called samco yet?

ya just got of the phone with him and he said its going to be about 130 each with the bung spacer jamnut and hiem:eek:

[MR.ROCKAPE]

ya just got of the phone with him and he said its going to be about 130 each with the bung spacer jamnut and hiem:eek:

DAMN THAT MEANS THE FIVE IM SITTING ON FOR MY UP COMING TOY BUILD JUST GOT MORE BLING!!!!!:Big Grin:

[POOR BOY]

how much did you pay and how long ago?

[POOR BOY]

well got the metal for my lower links last night(thanks rockape) now i just ahve to start collecting all the parts and build that damn thing:Big Grin:

[Connect]

Got all my three link hardware last week, that heim is fawking massive :eek:

http://i40.photobucket.com/albums/e248/nrminime/img140.jpg

Triangulated 3 link with poly bushings frame side for the upper, and high misalignments for the big boy.

[MR.ROCKAPE]

Got all my three link hardware last week, that heim is fawking massive :eek:

http://i40.photobucket.com/albums/e248/nrminime/img140.jpg

Triangulated 3 link with poly bushings frame side for the upper, and high misalignments for the big boy.

YEAH IM PRETTY SURE YOU COULD DROP THAT XJ OUT OF THE SKY AND THAT HIEM WOULD JUST LAUGH!!!!(BTW THE TRUGGY HAS 5 OF THOSE IN THE REAR 3 LINK!!!):eek:

[Connect]

YEAH IM PRETTY SURE YOU COULD DROP THAT XJ OUT OF THE SKY AND THAT HIEM WOULD JUST LAUGH!!!!(BTW THE TRUGGY HAS 5 OF THOSE IN THE REAR 3 LINK!!!):eek:

76k lbs :Big Grin: :rolleyes:

Even the 3/4's are like 42k lbs...

Still waiting on my one wheel from summit.... Two weeks overdue :rolleyes:
And gotta call shaffers to see about them air shocks :Big Grin: Parts are adding up quick, and the weather just keeps getting colder :frown:

[MR.ROCKAPE]

76k lbs :Big Grin: :rolleyes:

Even the 3/4's are like 42k lbs...

Still waiting on my one wheel from summit.... Two weeks overdue :rolleyes:
And gotta call shaffers to see about them air shocks :Big Grin: Parts are adding up quick, and the weather just keeps getting colder :frown:

GOOD LUCK ON THE WHEELS!!!I NOTICED THE SHIPPING INVOICE FOR MY WHEELS DIDNT EVEN HAVE MY NAME ON IT!!!!:Big Grin:

AND AFTER THIS COMING WEEKENDS FAB PROJECT FOR SOMEONE ELSE(PUTTING A 70 CHEVELLE FRONT SUSPENSION CLIP ON A 58 CHEVY TRUCK FRAME...)I WILL START DRAWING UP THE PLAN FOR THE X-THROTTLE TOYOTA BUILD!!!!:Big Grin: