NP435

[Fyresq]

Gotta a Ford NP435 Question........I have a CJ7 that has a 435 mated to a Dana 20 t-case. I believe the 435 is out of an interantional. Anyway the tranny is shot and I found one out of a '79 f-150 that was just rebuilt. I basically need to know if the tranny is the same as the International or did they have differences? :D Thanx in advance for the help!

[jeeper89]

http://www.novak-adapt.com/knowledge/np435.htm

using the site above.. i would say yes. that it should mate up to a dana20. if they were made from 1962-1979

435 Transmission
The 435 is an excellent, heavy-duty truck transmission designed and used in ½, 3/4 and 1+ ton trucks. It is a well-built transmission and remains easy to locate and generally inexpensive to buy and maintain. The strength, relatively short size and the gearing of the transmission make it a good choice for a variety of situations.

The NP435 was made by New Process Gear from 1964 thru 1997. They are found primarily in Ford trucks from 1966 to 1992 and Dodge trucks from 1964 to 1993. They also had limited distribution in GM & Chevrolet trucks from 1968-1972. They are also found in some IH and industrial applications