PDA

View Full Version : POWERSTROKE OWNERS.......

MR.ROCKAPE
October 15th, 2008, 11:07 AM
IF YA DIDNT KNOW....CAM POSITION SENSORS ARE CHEAP FROM THE DEALER!!!!I JUST PAID $22 FOR A SPARE TO KEEP IN THE GLOVE BOX OF MY TRUCK FOR THE UPCOMING HAMMERS TRIP!!!!

JUST AN FYI........
Hardcore-CashMoney
October 16th, 2008, 12:10 AM
:eek: wholy crap batman that is cheap!
MR.ROCKAPE
October 16th, 2008, 10:14 AM
:eek: wholy crap batman that is cheap!

WELL YEAH SINCE THE GOOG GUY DEAL FROM INTERNATIONAL USED TO BE $120.....WHEN FORD WANTED $200!!!!

FUNNY HOW A RECALL SHOWS YA HOW HARD THEY ARE F-ING YA ON PARTS COST!!!!!:mad:
blackjacks
October 16th, 2008, 11:07 PM
gonna get a few for stock
MR.ROCKAPE
October 16th, 2008, 11:24 PM
gonna get a few for stock

WELL IF YOU HAVE ONE OF THE 7.3 POWERED FORDS...ITS A GOOD IDEA TO KEEP ONE IN THE GLOVE BOX WITH A 10mm WRENCH!!!!I HAVE REPLACED ALOT OF THESE.....ONE THAT ONLY LASTED A WEEK!!!:frown:!
Hardcore-CashMoney
October 17th, 2008, 11:54 PM
WELL IF YOU HAVE ONE OF THE 7.3 POWERED FORDS...ITS A GOOD IDEA TO KEEP ONE IN THE GLOVE BOX WITH A 10mm WRENCH!!!!I HAVE REPLACED ALOT OF THESE.....ONE THAT ONLY LASTED A WEEK!!!:frown:!

Well its funny you just started this thread, one of my drivers trucks died tonight on the way home and that was the problem. Just a heads up if anyone needs one at night Silverstate International has them and their parts department is open till probably 1030 11pm M-F and I'm not sure on the times Saturdays but the dude hooked it up and only charged us 15 bucks.
Hardcore-CashMoney
October 18th, 2008, 11:48 AM
Hey Ape I forgot to tell you, the guy at International said that you could run a sensor out of a DT466 (i think that was it) and get 2 degree of advanced timing which would give ya a bit of power, better fuel milage and lower EGT's :neo:
mikeb
January 25th, 2009, 07:19 PM
Hey Ape I forgot to tell you, the guy at International said that you could run a sensor out of a DT466 (i think that was it) and get 2 degree of advanced timing which would give ya a bit of power, better fuel milage and lower EGT's :neo:

Is this true? I knew about the CPS going bad but hadn't heard about this trick.
Hardcore-CashMoney
January 25th, 2009, 11:39 PM
Ya but i'm not 100% sure what engine you have to get the sensor from though. The guys at international might know, but it is more expensive than the regular powerstroke one
highhpcummins
January 25th, 2009, 11:49 PM
Ya but i'm not 100% sure what engine you have to get the sensor from though. The guys at international might know, but it is more expensive than the regular powerstroke one

Yes, It's a DT466.
Skipped_Link
January 27th, 2009, 04:09 PM
Is this for all the 7.3 PS engines or is there a difference between the 94-97 & the 98-03?

I run the 6.0 but My brother & dad would love the DT466 unit in there 95 & 96 trucks
Hardcore-CashMoney
January 27th, 2009, 08:54 PM
Hum thats a good question. All I know is the stock one is about 15 bucks, and the other one is over 100
cblood
February 19th, 2009, 07:45 PM
the updated CPS is alot cheaper now. they are like $20 (just the part) from the dealer.
Hardcore-CashMoney
February 20th, 2009, 01:48 AM
the updated CPS is alot cheaper now. they are like $20 (just the part) from the dealer.

The DT466 one or the 7.3 one?
cblood
March 3rd, 2009, 01:51 PM
The DT466 one or the 7.3 one?

7.3 is the one I a talking about. Just read the WHOLE thread, and I am going to check out that other CPS.
BMFNTOY
November 10th, 2009, 09:47 AM
7.3 is the one I a talking about. Just read the WHOLE thread, and I am going to check out that other CPS.

Did anyone find out if the DT466 CPS works for both the 94-97 and the 98-03's?
I have a 97......

thanks
Jeff
Hardcore-CashMoney
November 10th, 2009, 11:09 PM
Did anyone find out if the DT466 CPS works for both the 94-97 and the 98-03's?
I have a 97......

thanks
JeffI don't think we ever did. I know the other sensor was about 100 bucks more though for only like 2 degree of timing or something. probably not worth it now that the stock sensor was only like 20 bucks or less when I bought it at silver state international.
BMFNTOY
November 12th, 2009, 10:32 PM
I don't think we ever did. I know the other sensor was about 100 bucks more though for only like 2 degree of timing or something. probably not worth it now that the stock sensor was only like 20 bucks or less when I bought it at silver state international.

Cool, thanks
bottomsup
November 14th, 2009, 08:07 PM
WELL IF YOU HAVE ONE OF THE 7.3 POWERED FORDS...ITS A GOOD IDEA TO KEEP ONE IN THE GLOVE BOX WITH A 10mm WRENCH!!!!I HAVE REPLACED ALOT OF THESE.....ONE THAT ONLY LASTED A WEEK!!!:frown:!Bought one less than a month ago and it shit out on me today:pissed: