AN AWESOME HOOK-UP!!!!!

[MR.ROCKAPE]

I HAD A DISCUSSION WITH THE AARON OVER AT BAYSHORE TRUCK EQUIPMENT COMPANY TODAY WHILE I WAS PICKING UP A DRIVELINE I HAD THEM SHORTEN.....

SINCE THEY KNOW WE ARE THE HARDCORE GUYS AND NEED GOOD DRIVELINES TO KEEP OUR JUNK ROLLING,THEY HOOKED US UP!!!

NEXT TIME YOU NEED A DRIVELINE LENGTHENED,SHORTENED,REPAIRED,WHATEVER....JUST TAKE IT TO THEM AND MENTION THEROCKGODS.COM AND YOU WILL RECIEVE A DISCOUNT......(A PRETTY GOOD ONE AT THAT!!!!:Big Grin: )

I AM GOING TO HAVE THEM BUILD ME A NEW LOWER SLIP SECTION AND RE-TUBE THE REAR ON MY BUGGY AND ADDRESS THE REAR ONE ON MY LO-BUDGET BUGGY AS WELL!!!!

THEY KEEP THE LONG SPLINE PARTS IN STOCK AND HEAVY WALL TUBE TO ENSURE THE MOST BULLET PROOF D-LINE POSSIBLE!!!!

HERE IS THEIR CONTACT INFO...


BAYSHORE TRUCK EQUIPMENT CO.
860 WATSON WY
SPARKS NV 89431
PH-331-6605

DONT FORGET TO MENTION THEROCKGODS.COM TO GET YOUR DISCOUNT!!!!

[Hardcore-CashMoney]

They been great guys to deal with (unfortunatly we've been doing it a lot lately)

[slvrbck]

Sweet deal!!!:Big Grin:

[wix]

They built both my front and rear d-lines. Was real happy about it. Very speedy.

[Mrburns]

They been great guys to deal with (unfortunatly we've been doing it a lot lately)

Very true!!!

When I was doing up the CJ's driveshafts...they took care of me pretty good, so they will be getting the YJ's business as well....

[BIG BLUE]

Although I do need my driveshafts lengthened i was hoping the tiltle had more to do with goldfingers. But still thanks!!

[NoBrainR]

Do they have any high angle CV's ?

[SPOON-EAZY]

GOOD DEAL. I'VE DEALT WITH HIGH ANGLE DRIVELINE IN THE PAST AND HAD GOT EXCELLENT SERVICE, BUT I REALLY LIKE THE IDEA OF A LOCAL SHOP THAT CAN BUILD GANGSTA DRIVESHAFTS. AND BY GANGSTA DRIVESHAFTS, I DON'T MEAN THE 1310 GEAR ROCKAPE USES :mullet:

[BryanD]

GOOD TO HEAR! i'll give them a try. i need to get rid of some toy CV's, and get a spare made up. i actually noticed i twisted the splines on my rear driveshaft last weekend at moonrocks - is that even possible with a toy tcase? I GUESS IT'S HOLDING UP SO FAR.

[MR.ROCKAPE]

GOOD DEAL. I'VE DEALT WITH HIGH ANGLE DRIVELINE IN THE PAST AND HAD GOT EXCELLENT SERVICE, BUT I REALLY LIKE THE IDEA OF A LOCAL SHOP THAT CAN BUILD GANGSTA DRIVESHAFTS. AND BY GANGSTA DRIVESHAFTS, I DON'T MEAN THE 1310 GEAR ROCKAPE USES :mullet:

ALWAYS HATE'N ON MY STYLE..........

GOOD TO HEAR! i'll give them a try. i need to get rid of some toy CV's, and get a spare made up. i actually noticed i twisted the splines on my rear driveshaft last weekend at moonrocks - is that even possible with a toy tcase? I GUESS IT'S HOLDING UP SO FAR.

YOU MUST HAVE TWISTED IT ON FLAT GROUND.......:mullet:

[4xyota]

nice I may have to try them when I get to the point of D-line's nothings more frustraiting that waiting on d-lines for a few weeks cuz the local douches cant build then when they say they can

[MR.ROCKAPE]

BUMPING THIS BACK UP!!!!

SINCE MY RIG WAS OVER DUE FOR SOME DRIVELINE UPGRADES AFTER THE TRIP THROUGH UPPER BRONCO.......

I TOOK BOTH THE FRONT AND REAR OVER TO BAYSHORE AND HAD THEM UPGRADE THE REAR TO .250 TUBE(FROM .095 THAT ANOTHER SHOP FIGURED WAS GOOD FOR CRAWLING....:rolleyes: ). AND MAKE A NEW LOWER SECTION FOR THE LONG SLIP FRONT THAT HAD STARTED TO TWIST!!!

BOTH PIECES ARE STOUTER AND READY TO BE GENTLY BEAT AGAINST ROCKS!!!:gapteeth:

IF YOU ARE IN NEED OF A DRIVELINE GO CHECK BAYSHORE OUT!!!! MAKE SURE YOU TELL THEM YOU ARE A ROCKGODS MEMBER AND HOW YOUR RIG GETS ABUSED!!!!

[BIG BLUE]

BOTH PIECES ARE STOUTER AND READY TO BE GENTLY BEAT AGAINST ROCKS!!!:gapteeth:


you should have been more gentle....:mad:

[Special K]

ahhh man, you broke a driveshaft? I knew I shouldn't have given you stickers and tried to capitalize on the free advertisement. haha!
did they still look pretty at least?
give me a shout, we'll get you fixed up......again

[MR.ROCKAPE]

ahhh man, you broke a driveshaft? I knew I shouldn't have given you stickers and tried to capitalize on the free advertisement. haha!
did they still look pretty at least?
give me a shout, we'll get you fixed up......again

THE FRONT MADE IT ABOUT 20 FEET INTO THE FIRST COARSE.......:frown:

IT STILL LOOKS BRAND NEW....NOT EVEN SCRATCHED PAINT.

[Brizzman]

What part of it broke? Got pics?

I've got a square tube front shaft on the FJ40. It's seems strong as hell, but I'd like to have something balanced for the street.

[MR.ROCKAPE]

What part of it broke? Got pics?

I've got a square tube front shaft on the FJ40. It's seems strong as hell, but I'd like to have something balanced for the street.

SORRY NO PICS....BUT IT JUST GOT MACHINED A BIT TOO THIN FOR A FRONT BURN AND STICKY TIRES!!!!:Big Grin:

[MR.ROCKAPE]

BUMPIN THIS BACK UP!!!

HAVE YOU BEEN GETTING THE TRG HOOK-UP??? IF NOT I HAVE......BRAND NEW FRONT WITH 1/4 WALL TUBE AND READY FOR SOME HEAVY DUTY USE!!!!

http://i1003.photobucket.com/albums/af156/chassisworxs/100_3945.jpg
http://i1003.photobucket.com/albums/af156/chassisworxs/100_3946.jpg

OH NO.....LOOK THEY EVEN GOT A STICKER ON MY RIG......:cool:

http://i1003.photobucket.com/albums/af156/chassisworxs/100_3947.jpg

ITS TOO BAD THE "OTHER" DRIVELINE SHOP CANT RUN WITH THESE GUYS!!!!


THANKS BAYSHORE!!!!

[Dnmeistr]

Bout time you updated this post you were bagging on them pretty good at the hoochy comp :thmasturbanana:

[MR.ROCKAPE]

Bout time you updated this post you were bagging on them pretty good at the hoochy comp :thmasturbanana:

:rolleyes:
IN A FIT OF ANGER I MIGHT HAVE SAID SOMETHING BUT IM ALSO SAYING RIGHT NOW THEY MADE IT RIGHT AND WILL BE BACK BECAUSE OF THEIR EXCELLENT SERVICE!!!!

PLUS IM PRETTY SURE THEY ARE KINDA NEW TO WHAT KIND OF STRESSES CRAWLING ADDS TO A DRIVELINES STRENGTH OR WEAKNESSES!!!! THEY GOT IT UNDR CONTROL!!!!:cool:

[L.D.]

I'VE HAD MY DRIVELINES DONE THERE FOR THE LAST 8/9 YEARS NOW. IT'S GOOD TO SEE THAT THEY ARE FINALY DOING THE .25" WALL TUBES NOW, I WAS GETTING THOSE DONE IN PRTLAND AND SENT TO ME.

[1SAWB]

ASK DSI HOW WELL HIS WORKED :eek:

[MR.ROCKAPE]

I'VE HAD MY DRIVELINES DONE THERE FOR THE LAST 8/9 YEARS NOW. IT'S GOOD TO SEE THAT THEY ARE FINALY DOING THE .25" WALL TUBES NOW, I WAS GETTING THOSE DONE IN PRTLAND AND SENT TO ME.

I THINK THEY ARE COMING AROUND AND WILL LIKELY MAKE YOU ONE BECAUSE YOU ARENT THE USUAL JOE PUBLIC THAT WANTS .250 WALL AND FULLY EXPECTS SMOOTH PURFECT CRUISING AT 95MPH....

THESE ARE COMPETITION SHAFTS BUILD FOR HARD USE AT LOW SPEEDS!!!!

ON A SIDE NOTE THEY DO AND WILL BUILD THEM WITH THE NON GREASABLE SPICER U-JOINTS!!!!(I KNOW YOU HAVE TOY ONES LD...... :mullet: )

[slvrbck]

That thing should say CAUTION, YOU CAN SMOOTH KNOCK A NIGGA OUT WITH THIS!!!

[Special K]

we still have a few tools left to get to speed up the thick wall tubing process, but we've learned a lot recently on doing these drivelines. To be honest, iin the past, the demand for such drivelines was so small, it wasn't practical to tackle em. Now that we've experimented with what works and what doesn't (both of which we learned a couple weekends back) we shouldn't have many issues.

and hey, next time you break a dvl, can you do it when not so many people are looking!! heh. That dvl would have been plenty stout for any renoxj'er

[slvrbck]

and hey, next time you break a dvl, can you do it when not so many people are looking!! heh. That dvl would have been plenty stout for any renoxj'er

BAD THING WAS, IT HAPPENED ON THE FIRST DAY OF THE COMP, FIRST COURSE OF THE DAY.....FIRST GATE!!!!!:eek:

The one that ya'll just built is BEEF!!! I picked it up today and it felt like it weighed a metric shit ton!!

[MR.ROCKAPE]

ASK DSI HOW WELL HIS WORKED :eek:

YEAH I TOLD THEM DSI DROVE LIKE A SOCCER MOM AND HEAVY DUTY WASNT NEEDED...... .065IN SHOULD HAVE BEEN MORE THAN ENOUGH!!!!:Big Grin:

I DID LIKE THE BROWNSVALLEY REPAIR THOUGH......SOMEONES RAIN GUTTER!!!:gapteeth:

[MR.ROCKAPE]

we still have a few tools left to get to speed up the thick wall tubing process, but we've learned a lot recently on doing these drivelines. To be honest, iin the past, the demand for such drivelines was so small, it wasn't practical to tackle em. Now that we've experimented with what works and what doesn't (both of which we learned a couple weekends back) we shouldn't have many issues.

and hey, next time you break a dvl, can you do it when not so many people are looking!! heh. That dvl would have been plenty stout for any renoxj'er

AFTER IT HAPPENED I FIGURED IT WAS A LEARNING CURVE KINDA THING.........IM PRETTY SURE THE U-JOINT,THE U-BOLTS OR THE AXLE SIDE YOKE ARE GONNA GIVE UP WELL BEFORE THE DRIVELINE ITSELF!!!!

OH AND SINCE JESSE ISNT SPOTTING FOR ME IM SURE NOBODY IS LOOKING AT CHICKEN WING........:laughat::thmasturbanana: <------SPANKIN THE MONKEY!!!

[slvrbck]

AFTER IT HAPPENED I FIGURED IT WAS A LEARNING CURVE KINDA THING.........IM PRETTY SURE THE U-JOINT,THE U-BOLTS OR THE AXLE SIDE YOKE ARE GONNA GIVE UP WELL BEFORE THE DRIVELINE ITSELF!!!!

OH AND SINCE JESSE ISNT SPOTTING FOR ME IM SURE NOBODY IS LOOKING AT CHICKEN WING........:laughat::thmasturbanana: <------SPANKIN THE MONKEY!!!


NOBODY EVEN NOTICED AT DONNER OR RENO.....:eek:

[BIG BLUE]

NOBODY EVEN NOTICED AT DONNER OR RENO.....:eek:

you were at the reno event?? who knew...

[slvrbck]

you were at the reno event?? who knew...

ACT LIKE YOU WASN'T CHECKIN' ME OUT....

[1SAWB]

I HAD PICS OF DVAE'S ALL TWISTED UP AND RANDOM PARTS WELDED TO THE SHAFT TO JUST GET BY WAS FUNNY AS HELL :Big Grin:

[slvrbck]

I HAD PICS OF DVAE'S ALL TWISTED UP AND RANDOM PARTS WELDED TO THE SHAFT TO JUST GET BY WAS FUNNY AS HELL :Big Grin:

THAT SHIT WAS FUNNY!! I BOUT FELL OVER WHEN I SAW IT THAT SUNDAY MORNING....HE PULLED EVERY PIECE OF SCRAP HE HAD TO GET THAT BITCH BACK TOGETHER!!!

[MR.ROCKAPE]

I DID GIVE THIS NEW FRONT SHAFT THE TEST.......FRONT DIGS ON THE PAVEMENT LAST NIGHT.......IT HELD UP!!!:lout:

[wbr775]

interesting. well dropped of my driveline on wensday. i hope it turns out like everyone says. all i need is new splines put on

[wbr775]

Amazing. That is all i have to say. i picked up my drive line today. used my sweet therockgods.com discount. brand new splines yoke u-joints and center bearing for a very reasonable price. plus got a kewl sticker. (that adds more horse power right?lol)

[MR.ROCKAPE]

Amazing. That is all i have to say. i picked up my drive line today. used my sweet therockgods.com discount. brand new splines yoke u-joints and center bearing for a very reasonable price. plus got a kewl sticker. (that adds more horse power right?lol)

NIIICE!!!!

:Big Grin:

[1uglyranger]

THAT SHIT WAS FUNNY!! I BOUT FELL OVER WHEN I SAW IT THAT SUNDAY MORNING....HE PULLED EVERY PIECE OF SCRAP HE HAD TO GET THAT BITCH BACK TOGETHER!!!

No he didn't..... he pulled out every piece of scrap metal that I had:gapteeth:

Son of a bitch stole all my shit....even shock tabs, and gussets..... I'll get him back at KOH, when I weld a piece of angle to his driveshaft before he leaves the start line:hijack::gapteeth:

[Special K]

haha, we have that mangled piece of art sitting on the shelf of bayshore on the hall o' shame.

[Hardcore-CashMoney]

haha, we have that mangled piece of art sitting on the shelf of bayshore on the hall o' shame.

nice can't wait to see this contraption next week when I come get some more of those stupid spicer lifetime slip boots that don't last a lifetime :pissed2: